Short answer
For horses, start with the steel horse feeder, from $249.95: it hangs on or clamps to a stall or corral panel, and both sets of brackets are included. For cattle on 4 by 8 big square bales, use the 4x8 big-bale feeder, from $1,750.
Choose a hay feeder around the hay you feed and the way it will be loaded. Blacktail’s horse feeder is a hay feeder that hangs on or clamps to a panel; the 4x8 feeder is built for 4 by 8 big square bales.
Plan animal access, bale-loading clearance and routine cleaning together. Confirm the feeder dimensions and the intended animal use before placing it in a shared enclosure.
A horse hay feeder for a stall or pen
The horse feeder is a hay feeder made from 3/4-inch 14-gauge steel tubing, with an anti-spill design and a drain hole. It comes in bare metal, and it can also be sandblasted and powder coated in dapple grey, black or a custom color.
Hanging brackets and clamp-on brackets come with it, with the hardware, so it mounts on a stall or corral panel. Ask for the width, depth and height if you need them to plan the spot.
The 4x8 big-bale feeder
The big-bale feeder is sized for 4 by 8 big square bales and built from 2-3/8-inch 14-gauge tube. It needs light assembly, and the bolt holes are CNC cut. Most ranches leave it bare metal; powder coat is available on request.
It keeps cattle from walking on or smashing the hay, which cuts waste. Allow room for equipment to load the bale and remove waste, and for the animals to feed around it.
Compare the feeding job
Choose by hay format before comparing the footprint.
| Feeder | Hay format | Planning details |
|---|---|---|
| Horse feeder | Loose hay for a stall or pen | Hangs on or clamps to a panel; brackets included |
| 4 × 8 ft big-bale feeder | 4 × 8 big square bale | Light assembly; plan loading clearance |





