Skip to content

Horse & Cattle Corral Panels

Horse panels are 10 or 12 ft long with 1-5/8 in posts and clamp together, two clamps per joint. The 20 ft cattle panel has a 2-3/8 in frame and detachable feet, and chains to the next panel with no clamps.

Compare corral panel designs

Horse panels clamp to horse panels and cattle panels chain to cattle panels, so start with the animals you keep.

DesignBest forPanel styleJoins withShop
Horse Corral PanelMost horse pens, runs and fence linesRails, mesh or wood insertClamps, sold separatelyView
Mustang Corral PanelHorses that need a taller fenceRails only, on a taller panelClamps, sold separatelyView
Cattle Corral PanelCattle and stock that test a fenceHeavier frame, stands on its own feetBuilt-in chain, no clampsView

Wood for insert panels isn't included.

Read the cattle corral guide

Questions buyers ask

Should I buy horse panels or cattle panels?

Horse panels are 10 or 12 ft long and 5 ft tall, with 1-5/8 in posts and a choice of 4 rails, 5 rails, wire mesh or wood inserts. They clamp together into pens, runs and fence lines. The cattle panel is the heavier line: 20 ft long, a 2-3/8 in frame, six 1-1/4 in rails and detachable feet, and it chains to the next panel. Pick the line for the animals you keep and the layout you're building.

How does each line connect?

Horse panels join with two 1-5/8 in panel clamps at each joint, sold separately at $4.50 each. Cattle panels use no clamps. Each one has a pre-welded chain and chain keeper, so you count panels and gates, not connectors.

What are the feet on the cattle panel for?

The cattle panel is freestanding: it stands on its feet, with no posts to set. The feet come off so the panels stack flat for freight. Allow for where the feet sit when you check ground clearance and the routes your equipment will take.

Can I mix horse and cattle panels in one fence?

Each line is made to join itself. Horse panels clamp to horse panels and horse gates; cattle panels chain to cattle panels and the 20 ft cattle gate combo. Horse-panel clamps aren't part of the cattle line, so call us before planning a fence that mixes the two.

How tall are horse and cattle panels?

The 10 ft and 12 ft horse panels are 5 ft tall. The 24 ft Mustang is 6 ft tall. The 20 ft cattle panel is sold 5 ft or 6 ft tall.

Is there a matching gate for each line?

Yes. Horse panels take bow gates with a 4 ft 6 in opening, or 10 ft and 12 ft panel-gate combos with a 4-1/2 ft gate, all clamped to the panels next to them. The cattle line has a 20 ft freestanding gate combo, $795.95 at 5 ft tall or $939.95 at 6 ft tall, with the same 2-3/8 in frame and detachable feet as the panels. It chains on like a panel. Confirm its clear opening with the order.

How do horse and cattle panel prices compare?

A 10 ft horse panel starts at $104.95, a 12 ft at $129.95 and the 24 ft Mustang is $395. The 20 ft cattle panel is $375 at 5 ft tall and $525 at 6 ft tall. Add two clamps per joint for horse panels; cattle panels need none. Prices are bare metal, and powder coat costs more. Freight to your address is shown at checkout, before you pay.

Complete your setup

Let’s get your setup priced.

Tell us what you need and where it’s going. We’ll help you put an order together.