Skip to content

Horse Stalls & Stall Kits

Horse stalls in 12 x 12, 12 x 24, 20 x 20 and 24 x 24 ft, with 4 or 5 rails, open or under a sloped cover. Every kit comes with its panels, a panel gate combo for each stall and the clamps. Rows of two or three stalls share walls, and add-ons share a wall with a stall you already have.

Compare horse stall designs

Every stall is steel panels and a gate that clamp together. Pick by whether you want a roof, a row, or an add-on to a stall you already have.

DesignBest forRoofSetupShop
Horse Stall KitA first stall that stands on its ownNo roofNo posts, no concreteView
Side-by-Side Horse StallsA row of stalls that share wallsOpen or coveredNo posts unless coveredView
Covered Horse StallHorses that need shade and rain coverHalf or all of the stallPosts set in concreteView
Add-On Horse StallAdding a stall to the Blacktail stall you ownOpen or coveredClamps to your stall, posts if coveredView
Read the horse stall buying guide

Questions buyers ask

What size horse stall do I need?

Start from floor area. A 12 x 12 ft stall is 144 sq ft. A 12 x 24 ft stall keeps the 12 ft width and doubles that to 288 sq ft, which leaves room for a covered end and an open run. A 20 x 20 ft stall is 400 sq ft and a 24 x 24 ft stall is 576 sq ft. Mark the size on the ground before you order, with the gate swing, feeder, water and room to clean.

Should a stall have 4 or 5 rails?

Every size comes both ways. Five rails close the gap between rails to 10-1/4 in, against 14-1/4 in on four rails. Pick five for young or untested horses, ponies and minis. Four rails costs less and is enough for a settled horse. On a 12 x 12 ft kit the difference is $820 against $860. Both are 14-gauge steel.

Which stall kits have a roof?

Only the ones with a cover or shelter in the name. The covered 12 x 12 ft stall has a 12 x 12 ft sloped cover over the whole stall, 10 ft high at the front and 9 ft at the back. Its roof is four 12 ft PBR panels in 26-gauge Galvalume on three Z-purlins, with the roofing screws. The covered 12 x 24 ft and 24 x 24 ft stalls have a 12 x 12 ft or 12 x 24 ft cover over half the stall, and the rest stays open.

Do I have to set posts for a stall?

Not for an open stall. The panels and gate clamp together and stand on the ground, with no welding. To make an open stall permanent, set a post in concrete at each corner and clamp the panels to those posts. Don't concrete the panel legs. Covered stalls come with ground posts and hardware: four on a single covered stall, six on a covered pair. Those posts go in concrete, which isn't included.

How does an add-on stall work?

An add-on shares a wall with a stall you already have, so it leaves out one side. The open 24 x 24 ft add-on is 5 panels, a gate combo and 14 clamps for $1,110. A standalone 24 x 24 ft kit is 7 panels and 16 clamps for $1,380. Add-ons come in 24 x 24 ft, open or with a 12 x 24 ft cover, and in 12 x 24 ft with a 12 x 12 ft cover. They fit Blacktail stalls only, so match the size and rail count. On a covered add-on you overlap the Z-purlins and roof panels with the existing stall and unscrew one of its roof panels.

Is a row of stalls cheaper than separate kits?

Yes, because stalls in a row share walls. Two 12 x 24 ft stalls side by side take 8 panels and 2 gate combos; two separate kits take 10 panels. The row is $1,920 with 4 rails, where a single 12 x 24 ft kit is $1,100. Rows come in two or three stalls. The size in a row's name is per stall, so "two 12x24 stalls" means two stalls that are each 12 x 24 ft.

How much does a horse stall kit cost?

Open single stalls run from $820 for 12 x 12 ft with 4 rails to $1,460 for 24 x 24 ft with 5 rails. Covered stalls start at $1,795. At the top, two 24 x 24 ft stalls with 5 rails and 12 x 24 ft covers are $5,130. Those prices are bare metal; dapple grey, black or a custom powder coat costs more. Freight to your address is shown at checkout, before you pay.

What doesn't a stall kit include?

Installation, which is quoted separately. Concrete for the ground posts on covered stalls. Corner posts, if you want to set an open stall permanently. Feeders, water and bedding: the kit is panels, gates, clamps and, on covered stalls, the roof. And powder coating, which is offered at extra cost; the standard bare metal weathers to a rust patina.

Complete your setup

Let’s get your setup priced.

Tell us what you need and where it’s going. We’ll help you put an order together.