Skip to content

Horse Corral Panels

Horse panels 10 or 12 ft long and 5 ft tall: 4 rails with 14-1/4 in gaps or 5 rails with 10-1/4 in gaps, a 12 ft wire-mesh panel, wood-insert frames and the 24 x 6 ft Mustang. Clamps are sold separately, two per joint.

Compare horse corral panel designs

Both are steel panels that clamp together, with clamps sold separately. Pick by how tall a fence you need and the panel style.

DesignBest forPanel styleWhere it fitsShop
Horse Corral PanelMost horse pens, runs and fence linesRails, mesh or wood insertAny layout, with shorter panels for cornersView
Mustang Corral PanelHorses that need a taller fenceRails only, on a taller panelLong straight runs; plan how you'll unload itView

Wood for insert panels isn't included.

Read the horse corral panel buying guide

Questions buyers ask

10 ft or 12 ft horse panels?

Both are 5 ft tall, with the same 14-gauge steel and 1-5/8 in posts. A 12 ft panel covers more of a straight run, so the same fence takes fewer panels and fewer joints. Use 10 ft panels for short sections, corners and places a 12 ft panel won't fit. The 12 ft panels have a 1-5/8 in center support; the 10 ft panels use 1-1/4 in. You can mix the two lengths in one layout, since the same clamps fit both.

How wide are the gaps between the rails?

14-1/4 in on 4-rail panels and 10-1/4 in on 5-rail panels. The wire-mesh panel has four rails with a 2 x 3 in wire grid filling the spaces between them. The Mustang has six rails over its 6 ft height. Weigh the size and habits of your horses, and what's on the other side of the fence, when you pick the opening.

How many clamps do I need for loose panels?

Two 1-5/8 in clamps at each joint. A straight run of 5 panels has 4 joints and needs 8 clamps. A closed pen of 12 panels has 12 joints and needs 24. Clamps are $4.50 each, galvanized or bare metal, and each comes with its carriage bolt and nut. Put the smooth end of the bolt on the inside so a horse can't catch on the nut.

How do the wood-insert panels hold the boards?

The 10 ft and 12 ft wood-insert panels are 5-rail frames that come with wood insert clamps. Both lengths take 2 x 10 boards. The wood isn't included, and the clamps that join one panel to the next are sold separately. If you'd rather bolt the boards on, ask for the welded-mount version, which fastens with 1-1/4 x 1/4 in lag bolts.

What's different about the Mustang panel?

It's 24 ft long and 6 ft tall, with six rails, against 5 ft for every other panel here. It's built from 1-5/8 in tubing with coped joints and welded end caps, and costs $395. Clamps are sold separately; match them to the posts it joins. Plan how you'll unload and move a 24 ft panel into place before you order.

Will these panels join another brand's panels?

They will if the other panels have 1-5/8 in posts, the size these clamps fit. For other post sizes, call us before ordering. Where a panel meets a 2-3/8 in post, such as a gate hang post or a set ground post, use the 2-3/8 to 1-5/8 in clamp adapter.

How are the panels built?

Each rail runs into the post and is welded there. The joints are coped, cut to wrap around the post, instead of crimped flat. A round tube braces the middle, not a flat strap. The post tops are capped and welded shut, so rain and wasps can't get into the tubing.

What do horse panels cost?

From $104.95 for a 10 ft 4-rail panel to $139.95 for a 12 ft 5-rail panel. The wire-mesh panel is $278, the wood-insert panels are $165.95 and $205.95, and the Mustang is $395. Those prices are bare metal, which weathers to a surface-rust patina; dapple grey, black or a custom powder coat costs more. Freight to your address is shown at checkout, before you pay.

Complete your setup

Let’s get your setup priced.

Tell us what you need and where it’s going. We’ll help you put an order together.