Skip to content

Cattle Corral Panels

20 ft freestanding cattle panels with a 2-3/8 in, 14-gauge frame, six rails and detachable feet. Each panel chains to the next, so there are no clamps to buy. Three panels and one 20 ft gate combo make a 20 x 20 ft pen.

Panel, gate or a complete pen?

Every piece stands on its own feet and chains to the next, with no posts, concrete or clamps. Buy loose panels and gates, or a kit that makes a complete pen.

DesignBest forWhat you getShop
Cattle Corral PanelBuilding or adding to a cattle fence lineOne panel, with its chain and keeperView
Freestanding Cattle Gate ComboPutting a gate in a run of cattle panelsA panel section with a gate built inView
20x20 Cattle Corral PenA complete holding pen in one orderPanels and a gate combo for one penView
Two 20x20 Cattle Corral PensKeeping two groups apartPanels and two gate combos, sharing a middle wallView

Loose panels and gate combos chain onto a kit later, to extend a pen or add another.

Read the cattle corral guide

Questions buyers ask

How do cattle panels connect without clamps?

Each panel has a pre-welded chain and chain keeper, and that is how it joins the next panel or gate combo. There's no welding or cutting, and no clamps to count or buy.

How is the 20 ft cattle panel built?

It has a 2-3/8 in, 14-gauge steel frame with six 1-1/4 in rails run through the uprights, coped joints and welded end caps. It is sold 5 ft or 6 ft tall. The feet come off so the panels stack flat for freight.

How many cattle panels do I need?

Each panel is 20 ft long, so count one piece for every 20 ft of fence and make one of them a gate combo where you want the opening. A 20 x 20 ft pen takes 3 panels and 1 gate combo, which is what the single pen kit contains. Two pens side by side share a middle wall and take 5 panels and 2 gate combos.

How do I add a gate to a run of cattle panels?

Use the 20 ft freestanding gate combo in the same height as your panels, 5 ft or 6 ft. It has the same 2-3/8 in frame and detachable feet, and it chains to the panels the same way they chain to each other. The 20 ft is its overall length, not the clear opening, so confirm the opening you need for animals and equipment with your order.

Can I move cattle panels later?

Yes. The panels stand on their own feet, with no posts to set. Unchain them, take the feet off to stack them, and set them up somewhere else.

How much do cattle panels cost?

The 20 ft panel is $375 at 5 ft tall and $525 at 6 ft tall, and the 20 ft gate combo is $795.95 at 5 ft tall and $939.95 at 6 ft tall. The single pen kit is $1,895 at 5 ft tall and $2,395 at 6 ft tall, and the side-by-side kit is $3,395 and $4,195. Those prices are for bare metal. Freight to your address is shown at checkout, before you pay.

Complete your setup

Let’s get your setup priced.

Tell us what you need and where it’s going. We’ll help you put an order together.