Skip to content

Continuous Fence Panels

Continuous fence in 10 and 20 ft sections, 4 ft tall, with 4 or 5 rails. Sections clip to posts at each end and the midpoint. Posts and clips are sold separately; you need one clip per rail at every post.

Browse all cattle equipment

Continuous fence or corral panels?

Both are steel fencing. Pick by whether you need a permanent line or a pen you may move later.

DesignBest forSetupBuy separatelyShop
Continuous Fence PanelA permanent boundary or fence linePosts set in the groundPosts, fence clips and screwsView
Horse Corral PanelA pen or run you may move laterStands on the ground, no posts to setPanel clampsView
Read the continuous fence guide

Questions buyers ask

How tall is continuous fence, and where does it sit on the post?

The sections are 4 ft tall. Clip them to the posts about 12 in off the ground for a 5 ft fence line.

How far apart do the posts go?

Set a post at each end of a section and one at its midpoint, where the section is left open for it. That puts posts 10 ft apart on 20 ft sections. Mark the boundary, corners, gates and changes in grade first, then mark a post at each end and the midpoint of every section.

How many fence clips do I need?

One clip per rail at every post: four at each post on a 4-rail fence, five on a 5-rail fence. Each clip holds a rail to a wood or steel post with a self-tapping screw, so add the screws to your count. The clip is 10-gauge, made for 1-1/4 in pipe, with a 1/4 in hole, and costs $1.55. It's a different part from the clamps that join freestanding corral panels.

What posts should I use?

The clips fit wood or steel posts. Our hardware range has 8 ft, 14-gauge steel posts in 1-5/8 in for $31.95 and 2-3/8 in for $35. The 8 ft length doesn't tell you how deep to set them; confirm the embedment and concrete for your ground before you dig.

Continuous fence or corral panels?

Continuous fence is a permanent line. The sections aren't freestanding; they clip to posts set in the ground. Corral panels stand on the ground and clamp to each other, so you can unclamp them and move the pen later. Use continuous fence for a permanent boundary, and panels for a pen you may want to move.

How do I turn a corner?

Survey the grade and direction of the line before ordering. Use 10 ft sections where the line turns or a 20 ft section would overrun the end. The shop can make elbow sleeves to carry the rails around a corner; ask about them with your order.

Can I put a gate in the fence line?

Mark each gate opening when you lay out the line, and end the sections on posts either side. Our arena swing gates are 4 ft tall, like the sections, and ship with their own hinge post. Hung 10 to 12 in off the ground, they line up with a 5 ft fence line.

What does continuous fence cost?

Sections run from $124.95 for a 10 ft 4-rail section to $196 for a 20 ft 5-rail section. A 20 ft 4-rail section is $160. Add posts and one clip per rail at every post. Freight to your address is shown at checkout, before you pay.

Complete your setup

Let’s get your setup priced.

Tell us what you need and where it’s going. We’ll help you put an order together.