Skip to content

Z-Purlins

Galvanized 14-gauge Z-purlins, sold by the piece: the 6 in profile for flat roofs in 10, 12, 20 and 25 ft, and the 8 in profile for sloped roofs in 12 and 25 ft. Your roof design sets the spacing and span.

Purlins, sheets or a ridge cap?

Z-purlins carry the PBR sheets, and a ridge cap closes the peak of a two-sided roof. Pick the part you're missing.

DesignBest forWhere it goesShop
Galvanized Z-PurlinCarrying the sheets on a flat or sloped roofAcross the frame, under the sheetsView
Galvalume PBR Roofing PanelRoofing or siding a barn, shelter or shed rowOn the purlins, or on a wall as sidingView
Galvalume Ridge CapClosing the peak of a two-sided roofAlong the peak, over the top sheetsView

A complete shelter kit already includes its roof. Loose parts are for repairs, extensions and roofs built to your own design.

Read the roofing and purlin guide

Questions buyers ask

6 in or 8 in Z-purlins?

Use the 6 in profile on a flat roof and the 8 in profile on a sloped roof. The 6 in comes in 10, 12, 20 and 25 ft; the 8 in comes in 12 and 25 ft. Order by profile and length together, since the 12 ft and 25 ft sizes come in both.

Is the listed length the actual length?

Not exactly. Listed lengths are nominal. The 20 ft, 6 in purlin is 21 ft overall, which leaves room to overlap where purlins meet at a support.

How far apart do the purlins go?

Your roof design sets that: the span, the loads, the profile and the connections. We don't publish span or spacing tables, and the profile depth alone doesn't give you an allowable span.

Do I need purlins if I buy a shelter kit?

No. A complete shelter kit comes with its roof assembly. Loose purlins are for repairs, extensions or a roof you're building to your own design.

Which roof sheets go on these purlins?

Our 26-gauge Galvalume PBR sheets, 6 to 24 ft long, fastened to the purlins with self-tapping screws that have rubber washers. Each sheet covers 3 ft of width once lapped. Add ridge caps where two roof planes meet.

How much do Z-purlins cost?

6 in purlins run from $65 for 10 ft to $127.95 for 25 ft. 8 in purlins are $97.95 for 12 ft and $169.95 for 25 ft. Those prices are for the galvanized finish. Long pieces need room to unload and handle. Freight to your address is shown at checkout, before you pay.

Complete your setup

Let’s get your setup priced.

Tell us what you need and where it’s going. We’ll help you put an order together.