Skip to content

Horse Round Pen Kits

Round pens in 40, 50 and 60 ft diameters: steel kits with 4 or 5 rails, and Signature Series kits framed for wood infill. Every steel kit comes with its 10 ft panels, a 4.5 ft bow gate and the clamps.

Compare round pen designs

Both pens are steel panels that clamp together. Pick by whether you want wood on the lower walls and a second, wider gate for equipment.

DesignBest forSidesGatesShop
Steel Round PenA pen with no concrete, easy to move laterOpen railsWalk-through bow gateView
Signature Series Wooden Round PenA wood-walled pen you can drive equipment intoYour boards, open rails aboveWalk-through bow gate, plus a wide equipment gateView

The equipment gate's post comes with the kit, and you set it. Signature Series kits don't include the wood.

Read the round pen buying guide

Questions buyers ask

What size round pen do I need?

Pick by the work you'll do in it. A 40 ft pen suits groundwork on foot and keeps the horse close; a canter in it is tight. A 50 ft pen is the usual pick for groundwork plus some riding, and the safe choice if you haven't decided. Go to 60 ft if you'll ride in it regularly. That's field feedback from how these pens get used, not a lab result. Measure the diameter across the center of the site, then leave room outside the fence for the gate, mowing and getting a horse in and out.

How many panels are in a round pen kit?

Each steel kit uses our 10 ft panels. The 40 ft kit has 12 panels and 26 clamps, the 50 ft has 15 panels and 32 clamps, and the 60 ft has 18 panels and 38 clamps. Each also has a 4.5 ft bow gate with an EZ-latch. If you've seen panel counts for 12 ft panels, that's a different system: our 60 ft pen is 18 ten-foot panels plus the gate.

Should I get 4 rails or 5?

Five rails for young or untested horses, ponies and minis, or for a pen the public can reach. The gap between rails is 10-1/4 in, against 14-1/4 in on four rails. Four rails is lighter, costs less and is enough for a settled horse. Both use the same 14-gauge steel, 1-5/8 in posts and 1-1/4 in rails, with welded end caps.

Steel or Signature Series wooden?

Steel pens are open rail all the way up and start at $1,550. Signature Series pens have C-channel along the lower part of each panel and gate to hold your own 2x6, 2x8 or 2x10 boards, cut to fit. They add a separate 10 ft swing gate for equipment, and start at $3,995. The wood is not included.

Does a round pen need concrete?

Not the steel kits. The panels stand on the ground and clamp together with the included clamps, so there are no post holes to dig. That also means you can unclamp the circle and set it up somewhere else later. The Signature Series swing gate hangs on its own 8 ft post, so plan how you'll set that post on your site.

How much does a round pen cost?

Steel kits run from $1,550 for a 40 ft 4-rail pen to $2,495 for a 60 ft 5-rail pen. Signature Series wooden kits are $3,995, $4,795 and $5,495 for 40, 50 and 60 ft. Those prices are bare metal; dapple grey, black or a custom powder coat costs more. Freight to your address is shown at checkout, before you pay.

Can I set it up myself?

Yes. The panels and gate clamp together on the ground; one customer and their son put up a 60 ft pen in an afternoon. If you'd rather not, we can quote installation separately. Either way, the footing inside the pen is site work and isn't part of the kit.

What doesn't the kit include?

Footing, which is the biggest job on most sites: your soil, rain and how often you work the pen decide the base. Installation, which is quoted separately. The wood for Signature Series pens. And powder coating, which is offered at extra cost; the standard bare metal weathers to a surface-rust patina.

Complete your setup

Let’s get your setup priced.

Tell us what you need and where it’s going. We’ll help you put an order together.