
4-Rail 12x12 Horse Stall Kit
No reviews yet.Write a review
$820.00 each, plus shipping
- Estimated delivery in 1-2 weeks
- Made in the USA
This 4-rail 12x12 horse stall kit gives one settled horse a 144 sq ft pen of its own, so it can eat without the herd crowding in or be kept up overnight. As a single horse stall it takes only a corner of a lot, and four rails are enough for a horse that already respects a fence.
We weld the panels and the panel gate combo at our shop. The kit includes the clamps that join them into a square, and you add the feeder, water and bedding.
- Put it up yourselfAssembly guide
- Or have it installedRequest an installation quote
A box stall's floor, set out in the open
Twelve feet a side is the box-stall size Penn State Extension gives for a 1,000 lb horse. A box stall is for eating and resting, so plan daily turnout in a pasture or paddock. Every chore goes through the gate, so leave clear ground outside it for the swing and for carrying hay in.
Level ground that sheds water
Choose level ground that drains, so every panel leg sits evenly and rain runs off instead of pooling in the stall. Stake out a 12 ft square first to check it clears fences, trees and the path you drive.
A clear spot near the stall site
Clear a firm, level spot near the stall site where the truck and trailer can pull in and turn around, and have someone there to help lift the panels off. Check every piece against What's included and note any damage on the delivery receipt before the driver leaves.
The kit
- Size
- 12 x 12 ft
- Rails
- 4 rail
- Steel
- 14 gauge
- Longest piece
- 12 ft
- SKU
- BT-000173
Parts
12 ft x 5 ft 4-Rail Horse Corral Panel
- Length
- 12 ft
- Height
- 5 ft
- Rails
- 4
- Post
- 1-5/8 in
- Rail tubing
- 1-1/4 in
- Center support
- 1-5/8 in
- Rail spacing
- 14-1/4 in
- Steel
- 14 gauge
- Construction
- Welded end caps
Panel Gate Combo 12 ft 4-Rail
- Length
- 12 ft
- Rails
- 4 rail
- Steel
- 14 gauge
What’s included
Quantities are for one kit.
Panels and gates
- 312 ft corral panels
- 112 ft panel gate combo
Hardware
- 8Panel clamps with hardware
Questions
Should a foal or pony have 5 rails instead?
Yes, that's what we suggest. Four rails leave 14-1/4 in between them, which is enough for a settled horse. Five rails narrow the gap to 10-1/4 in for foals, ponies, minis and untested horses. The 5-rail 12x12 kit is $860.00, and this one is $820.00; choose 5 rail under Railing to switch.
Is there a covered version?
Yes, as its own kit. The covered 4-rail 12x12 has shelter panels, ground posts and a 12 x 12 ft sloped roof over the whole stall, for $1,795.00. Choose Fully covered under Cover on this page to see it.
What if the horse will be penned most of the day?
Give it more ground. The 4-rail 12x24 doubles the floor to 288 sq ft for $1,100.00, and the 4-rail 24x24 gives 576 sq ft for $1,380.00.
Is it a freestanding horse stall?
The kit has no ground posts; What's included on the Specifications tab lists every piece. If you want the stall anchored or set a particular way on your ground, ask us before you order and we'll confirm what your site needs.
Do you install it?
Installation isn't in the kit. We quote it separately, so ask for a quote if you'd rather not set the stall up yourself.
Can I cancel after I order?
No. All sales are final, and orders can't be cancelled once placed. Measure your site and settle on the rail count before you check out.



