2-3/8" Galvanized Panel Clamp for 2-3/8" Post
$6.95each, plus shipping
- Estimated delivery in 1-2 weeks
- Made in the USA
Questions about fit or quantity? Call (619) 914-6657
A heavy-duty galvanized panel clamp for 2-3/8 in posts, pipe and panels. Each clamp comes with its carriage bolt and nut.
Where the 2-3/8 in clamp goes
Use it where both sides of the joint are 2-3/8 in, such as two heavy posts or a 2-3/8 in pipe run. Measure the upright, not the horizontal rail.
Where a 1-5/8 in horse panel meets a 2-3/8 in post, use the mixed-size adapter instead. Put the smooth end of the bolt on the inside of the pen so animals cannot catch on the nut.
- Steel
- Galvanized steel
- Post fit
- 2-3/8 in
- Hardware
- Carriage bolt and nut included
- SKU
- BT-000774
Shipping cost
Priced at checkout from your delivery address, order weight and quantity. You see the amount before you pay. You can also arrange to pick the order up yourself.
Delivery day
Someone must be on site during the carrier’s delivery window. Leave a firm surface and room for a trailer to turn around. The driver calls ahead when they can; a missed window can mean a redelivery charge.
Unloading
You unload. Have a tractor with forks, a skid steer, or enough people to hand-unload. The driver won’t take material off the trailer unless that was agreed in writing before the truck left.
When it arrives
Steel travels loose on the trailer, so scuffs and strap marks are common. Inspect the load, note any damage on the delivery receipt, photograph it at the truck and contact us the same day.
Warranty
This hardware is excluded from Blacktail's limited lifetime warranty.
Does this fit a 1-5/8 in horse panel?
No. This clamp is for 2-3/8 in on both sides. Use the 1-5/8 in clamp between horse panels, or the adapter where a 1-5/8 in panel meets a 2-3/8 in post.
Is the bolt included?
Yes. Each clamp comes with a carriage bolt and nut.
Also in panel clamps & hardware
2-3/8" to 1-5/8" Galvanized Panel Clamp Adapter
$8.50
1-5/8" Galvanized Panel Clamp
$4.50
8 ft Post 2-3/8" With Welded End Cap
$35.00
Planning a bigger project?
Tell us what you need and where it’s going. We’ll help you put an order together.
Request a quote →